|
T-LT |
|
Low Temperature Thermocouple Sensor.
|
|
|
|
Features::
Operating temperature: max 250 degC.
Sheath material: 316 st/st or other.
Sheath diameter: 3 mm, 4 mm, 4.7 mm(3/16"), 6.4 mm(1/4").
Calibration: K, J, T, N.
L1 Insertion length in mm.
L2 Lead length in mm.
Tail/lead type PVC(105 degC), PTFE(250 degC), F/G(350 degC), SSOB(350 degC).
Extra fittings: Plug, socket, compression fitting or other.
|
TM-A |
|
Mineral Insulated Thermocouple standard tail.
|
|
|
|
|
Features::
Operating temperature: max 1200 degC.
Sheath material: 310 st/st, 321 st/st, 316 st/st, 600 inconel, nicrobel C.
Sheath diameter 1.5 mm, 3.0 mm, 4.5 mm, 6.0 mm, 10.8 mm.
Calibration: K, J, T, N.
Single/duple x Single or duplex.
L1 Insertion length in mm.
L2 75 mm or other up to 100 mm.
Tail type PVC(105 degC), PTFE(250 degC), F/G(350 degC).
Extra fittings Plug, socket, compression fitting or other. |
|
TM-ET |
|
Mineral Insulated Thermocouple with extended lead.
|
|
|
|
|
Features::
Operating temperature max 1200 degC.
Sheath material: 310 st/st, 321 st/st, 316 st/st, 600 inconel, nicrobel C.
Sheath diameter 1.5 mm, 3.0 mm, 4.5 mm, 6.0 mm, 10.8
Calibration K, J, T, N.
Single/duple x Single or duplex.
L1 Insertion length in mm.
L2 Lead length in mm.
Tail/lead type PVC(105 degC), PTFE(250 degC), F/G(350 degC), SSOB(350 degC).
Extra fittings Plug, socket, compression fitting or other. |
|
TM-H |
|
Mineral Insulated Thermocouple complete with connection head.
|
|
|
|
|
Features::
Operating temperature max 1200 degC.
Sheath diameter 3.0 mm, 4.5 mm, 6.0 mm, 10.8 mm.
Calibration K, J, T, N.
Single/duple x Single or duplex.
L1 Insertion length in mm.
Connection head size Large or small.
Connection head mat. Alloy, Bakelite, Cast Iron, 316 st/st, EXD 316 st/st.
Extra fittings Compression fitting or other. |
|
TM-P |
|
Mineral Insulated Thermocouople complete with plug
|
|
|
|
|
Features::
Operating temperature max 1200 degC.
Sheath material 310 st/st, 321 st/st, 316 st/st, 600 inconel, nicrobel C.
Sheath diameter 1.5 mm, 3.0 mm, 4.5 mm, 6.0 mm, 10.8 mm.
Calibration K, J, T, N.
L1 Insertion length in mm.
Plug or socket Plug or socket.
Plug type Low temperature, Extended limit, Ultra high limit.
Extra fittings Crimp fitting, compression fitting or other. |
|
TM-PH |
|
Mineral Insulated Thermocouple, direct mount. Complete with connection head.
|
|
|
|
|
Features::
Operating temperature max 1200 degC.
Sheath material 310 st/st, 321 st/st, 316 st/st, 600 inconel, nicrobel C.
Sheath diameter 3.0 mm, 4.5 mm, 6.0 mm, 10.8 mm.
Calibration K, J, T, N.
Single/duple x Single or duplex.
L1 Insertion length in mm.
Spring loading Yes or no.
Connection head size Large.
Connection head mat. Alloy, Bakelite, Cast Iron, 316 st/st, EXD 316 st/st.
Process thread 1/2"BSPT or other. |
|
|
TM-TB |
|
Mineral Insulated Thermocouple complete with terminal block.
|
|
|
|
R-LT |
|
Low Temperature RTD Sensor.
|
 |
|
Features::
Operating temperature max 250 degC.
Sheath material 316 st/st or other.
Sheath diameter 3.0 mm, 4.0 mm, 4.7 mm(3/16"), 6.4 mm(1/4"), 8.0 mm(5/16"), 9.5 mm(3/8"), 12.7 mm(1/2").
Sensor type PT100, PT1000, 2PT100 (
Number of wires 2 wire, 3 wire, 4 wire.
L1 Insertion length in mm.
L2 Lead length in mm.
Tail/lead type PVC (105 degC), PTFE (250 degC).Extra fittings Plug, socket, compression fitting or other. |
|
|
 |
|
Features::
Operating temperature max 400 degC.
Sheath material 316 st/st or other.
Sheath diameter 3.0 mm, 4.0 mm, 4.7 mm(3/16"), 6.4 mm(1/4"), 8.0 mm(5/16"), 9.5 mm(3/8"), 12.7 mm(1/2").
Sensor type PT100, PT1000, 2PT100 (duplex).
Number of wires 2 wire, 3 wire, 4 wire.
L1 Insertion length in mm.
L2 Lead length in mm.
Tail type PVC (105 degC), PTFE (250 degC).
Extra fittings Plug, socket, compression fitting or other. |
|
RM-ET
|
|
RTD extended tail sensor
|
|
 |
|
Features::
Operating temperature max 450 degC.
Sheath material 316 st/st or other.
Sheath diameter 3.0 mm, 4.0 mm, 4.7 mm(3/16"), 6.4 mm(1/4"), 8.0 mm(5/16"), 9.5 mm(3/8"), 12.7 mm(1/2").
Sensor type PT100, PT1000, 2PT100 (duplex).
Number of wires 2 wire, 3 wire, 4 wire.
L1 Insertion length in mm.
L2 Lead length in mm.
Tail/lead type PVC (105 degC), PTFE (250 degC).
Extra fittings Plug, socket, compression fitting or other. |
|
|
RM-H
|
|
RTD Standard Sensor with connection head
|
|
 |
|
Features::
Operating temperature max 400 degC.
Sheath material 316 st/st or other.
Sheath diameter 3.0 mm, 4.0 mm, 4.7 mm(3/16"), 6.4 mm(1/4"), 8.0 mm(5/16"), 9.5 mm(3/8"), 12.7 mm(1/2").
Sensor type PT100, PT1000, 2PT100 (duplex).
Number of wires 2 wire, 3 wire, 4 wire.
L1 Insertion length in mm.
Connection head size Large or small.
Connection head mat. Alloy, Bakelite, Cast Iron, 316 st/st, EXD 316 st/st.
Extra fittings Compression fitting or other. |
|
|
RM-P
|
|
RTD Standard Sensor with Plug
|
|
 |
|
Features::
Operating temperature max 400 degC.
Sheath material 316 st/st or other.
Sheath diameter 3.0 mm, 4.0 mm, 4.7 mm(3/16"), 6.4 mm(1/4"), 8.0 mm(5/16"), 9.5 mm(3/8"), 12.7 mm(1/2").
Sensor type PT100, PT1000, 2PT100.
Number of wires 3 wire only.
L1 Insertion length in mm.
Plug or socket Plug or socket.
Extra fittings Crimp fitting, compression fitting or other. |
|
|
RM-PH
|
|
RTD Standard Sensor, direct mount with connection head
|
|
 |
|
Features::
Operating temperature max 400 degC.
Sheath material 316 st/st or other.
Sheath diameter 3.0 mm, 4.0 mm, 4.7 mm(3/16"), 6.4 mm(1/4"), 8.0 mm(5/16"), 9.5 mm(3/8"), 12.7 mm(1/2").
Sensor type PT100, PT1000, 2PT100 (duplex).
Number of wires 2 wire, 3 wire, 4 wire.
L1 Insertion length in mm.
Spring loading Yes or no.
Connection head size Large.
Connection head mat. Alloy, Bakelite, Cast Iron, 316 st/st, EXD 316 st/st.
Process thread 1/2"BSPT or other. |
|
RM-TB
|
|
RTD Standard Sensor with connection block
|
|
 |
|
BT-MF-PAR
|
|
Barstock Thermowell - Male / Female
|
|
 |
|
Features::
Process temperature Process temperature in degC.
Process pressure Process pressure in kPa.
Sheath material 316 st/st or other.
L1 Insertion length in mm.
Process connection 1/2"BSP, 3/4"BSP or other.
Instrument connection 1/2"BSP. |
|
|
BT-MF-TAP
|
|
Barstock Thermowell - Male / Female
|
|
 |
|
Features::
Process temperature Process temperature in degC.
Process pressure Process pressure in kPa.
Sheath material 316 st/st or other.
L1 Insertion length in mm.
Process connection 3/4"BSP or other.
Instrument connection 1/2"BSP. |
|
FT-CF
|
|
Fabricated Thermowell - Compression Fitting
|
|
 |
|
Features::
Process temperature Process temperature in degC.
Process pressure Process pressure in kPa
Sheath material 316 st/st or other.
L1 Insertion length in mm.
Sheath diameter 9.5 mm(3/8"), 12.7mm(1/2").
Process connection 1/2"BSP or other.
Instrument connection 1/2"BSP. |
|
|
FT-MF
|
|
Fabricated Thermowell - Male/Female
|
|
 |
|
Features::
Process temperature Process temperature in degC.
Process pressure Process pressure in kPa.
Sheath material 316 st/st or other.
L1 Insertion length in mm.
Sheath diameter 9.5 mm(3/8"), 12.7mm(1/2").
Process connection 1/2"BSP or other.
Instrument connection 1/2"BSP. |
|
Industrial Solutions 
