The Shinko JC Series has many features and is a very flexible controller. Along with its low cost and ease of configuration, this is the preferred option for many applications.

The FC Series is the high performance controller for single loop applications to various process controls as well as temperature control.

Configuration setting for alarm action type, Output limit setting, Direct/Reverse action switching are optionally available. All series comply with CE marking requirements. It is possible to add Serial communication function, Setting value memory function to the GCS-300 series as an option. This is not possible for other series.

Meets the various needs with ±0.1% accuracy and a sampling period of 0.1 sec. Interactive multi-display allows easy key operation. Versatile inputs are of 10 types of Thermocouple, 1 type of RTD, 2 types of Current and 7 types of Voltage. By adding an option, Cascade control is available with one unit.

Programmable low cost controller with simplified settings which costs the same as a temperature indicating controller. Pattern switch is easily done by key operation. Two Alarm outputs, Time signal output, RUN output and one Event output to signal Pattern end output are equipped as standard functions.

16 steps/pattern by 20 patterns, max. up to 320 steps are applicable for program linkage. Accuracy is of ±0.1% with sampling period of 0.1 seconds meets the needs of difficult process control. Interactive setting system by the LCD allows easy specification setting. Adding an external memory as an option enables data saving/load.

10 steps/pattern by 10 patterns, i.e. max. 100 steps are applicable for program linkage. Transient characteristics of the control when changing the step has been improved by Fuzzy algorithms. Specification setting is easily done with multi-range and multi -function. Safety standards based on UL/CSA, CE marking.