Menu

Home
About Us
News
Industrial Solutions
Winery Solutions
Documents
Links
Contact Us
Home arrow Industrial Solutions arrow Process Instrumentation arrow Signal Conditioners
Signal Conditioners PDF Print E-mail

 

XJ2 (2 Wire) Universal Input Single Transmitter

 

XJ22 (2 Wire) Universal Input Dual Transmitter

 

xj2-seriespic

 

 

xj22-seriespic

 

 XJ2 (Single Transmitter)

 XJ22 (Dual Transmitter)

 Features:  Features:
 
  • Field Programmable Bi-Polar Input Ranges.
  • Input Types:
        - mV, V & mA.
        - RTD Pt100.
        - Differential RTD.
        - Thermocouple (T/C).
        - Bridge \ Strain Guage.
        - Potentiometer.
        - Resistance.
  • Input to Output Isolation 2.0kV.
  • High Accuracy 0.1%
  • Reverse Polarity Protected.
  • LED Indication of Current Loop (CL).
  • Compact DIN Rail Mount Enclosure.
  • Available with One or Two Transmitters per Enclosure.
  • Available Standard or Special Calibration.
  • Easy Install.
  • Low Cost.
    		•   
  • Field Programmable Bi-Polar Input Ranges.
  • Input Types:
        - mV, V & mA.
        - RTD Pt100.
        - Differential RTD.
        - Thermocouple (T/C).
        - Bridge \ Strain Guage.
        - Potentiometer.
        - Resistance.
  • Input to Output Isolation 2.0kV.
  • High Accuracy 0.1%
  • Reverse Polarity Protected.
  • LED Indication of Current Loop (CL).
  • Compact DIN Rail Mount Enclosure.
  • Available with One or Two Transmitters per Enclosure.
  • Available Standard or Special Calibration.
  • Easy Install.
  • Low Cost.
    		•

     

     

    XJ-2 & XJ-22 Specifications:

    		 
     
    xj2-pic1
     
    xj22-pic1
     Ordering Information:  
     
    xj2-ordering
     

     

     

     

     XJ4 (4 Wire) Universal Input Single Transmitter
     xj4-seriespic
     

    Features:

    • Field Programmable Bi-Polar Input \ Output Ranges.
    • Input Types:
      - mV, V & mA.
      - RTD Pt100.
      - Differential RTD.
      - Thermocouple (T/C).
      - Bridge \ Strain Guage.
      - Potentiometer.
      - Resistance.
    • Input to Output Isolation 2.0kV.
    • High Accuracy 0.1%
    • Universal AC \ DC Power Supply.
    • Transmitter Power Supply.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Low Cost.
     Ordering Information:
     xj4-ordering
     XJ4 Diagram:
     xj4-pic1

     

     

    LPI-CT (AC Current Transmitter) 
     lpict-seriespic
     

    Features:

    • Field Programmable 1Aac or 5Aac.
    • Mains Isolated.
    • High Accuracy.
    • Reverse Polarity Protected.
    • LED Indication of Current Loop (CL).
    • Compact DIN Rail Mount Enclosure.
    • 40~200mV Output Test Signal.
    • Easy to Install.
    • Low Cost.
    • Wide P/S Range.
    • Available with One or Two Transmitters per Enclosure.
     Ordering Information:
     lpict-ordering

     

     

     IN-CLL (Current Loop Limiter)
     incll-seriespic
     

    Features:

    • Compact DIN Rail Mount Enclosure.
    • High Accuracy.
    • Low Cost.
    • Easy to Install.
    • Reverse Polarity Protection.
    • Setpoint Adjustment Externally Accessible (By 20 turn potentiometer).
     

    Description:

    The IN-CLL is a loop powered transmitter designed to limit the maximum current that can flow in a 0~20mA or 4~20mA loop. Requiring only 3V (equivalent to 150Ω @ 20mA) out of the loop supply. The setpoint can be adjusted anywhere from 1 to 22mA, has excellent cut-off with no effect on calibration.

     Ordering Information:
     incll-ordering

     

     

    LPI-D (DC Transmitter) 
     lpi-seriespic
     

    Features:

    • Field Programmable Bi-Polar Input ranges.
    • Isolated Input to Output 2.0kV.
    • High Accuracy.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpid-ordering

     

     

     

    XI 4~20mA Isolator Series

    XI-L Loop Powered Isolators

     Isolating 4~20mA Input to 4~20mA Output Loop Powered Transmitter
     xil-pic1
     Features:
    • Input to Output Isolation 1kV.
    • High Accuracy 0.1%.
    • Reverse Polarity Protected.
    • Compact DIN Rail Mount Enclosure.
    • Available With 1, 2 or 4 Transmitters per Enclosure.
    • Easy to Install.
    • Low Cost.
     xil-pic2
     

    Ordering Information:

     

    XI-L1
    XI-L2
    XI-L4    		 One Unit per Enclosure.
    Two Units per Enclosure.
    Four Units per Enclosure.

     

     

     

    XI 4~20mA Isolator Series

    XI-P Input Powered Isolators

     4~20mA Input Powered to 4~20mA Output Isolation Transmitter
     xip-pic1
     

    Features:

    • No Power Supply Needed - Input Powers Transmitter.
    • Ideal for isolating a typical 4~20mA loop.
    • Input to Output Isolation 1kV.
    • High Accuracy.
    • Reverse Polarity Protected.
    • Compact DIN Rail Mount Enclosure.
    • Available With 1, 2 or 4 Transmitters per Enclosure.
    • Easy to Install.
    • Low Cost.
     xip-pic2
     

    Ordering Information:

     

    XI-P1
    XI-P2
    XI-P4    		 One Unit per Enclosure.
    Two Units per Enclosure.
    Four Units per Enclosure.

     

     

     PI-F (Programmable Isolating Frequency Transmitter)
     pi-seriespic
     

    Features:

    • Field Programmable Input and Output Ranges.
    • Bi-Polar Output Ranges.
    • Fast Response Time, Allowing Accurate Control.
    • Impedance Matching on Input.
    • Contact Closure Selection.
    • Crystal Locked Period Measurement.
    • Input to Output Isolation 1.0kV.
    • High Accuracy 0.1%
    • Universal AC/DC Power Supply.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
     Ordering Information:
     pif-ordering

     

     

    LPI-F (Frequency Transmitter) 

     lpi-seriespic1                                                        lpi-f-e

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

                           LPI-F-D                                                LPI-F-E

     

    Features:

    • Field Programmable Input Ranges.
    • Isolated Input to Output 2.0kV.
    • Impedance Matching on Input.
    • Crystal Locked F-V.
    • Selectable Damping.
    • High Accuracy 0.1%. 
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount or IP67 Water Resistant Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpif-ordering

     

     

    TWN-FO (TWI-FO) (PLC Input Transmitter) 
     twnfo-seriespic
     

    Features:

    • PLC Interface. Converts 4~20mA Signal into a Frequency for Direct Conversion into a Digital Input.
    • Isolated Input to Output 1.6kV for TWI-FO.
    • High Accuracy.
    • LED Indication of Frequency Output.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Reverse Polarity Protection.
    • Externally Accessible Span and Zero Adjustments.
     

    Description:

    The TWI-FO and TWN-FO are designed as a low cost alternative to expensive A/D cards on PLCs, computers and data acquisition systems. The TWI-FO and TWN-FO convert and analogue signal into a linear, frequency output signal, with a 50:50 mark space ratio. Ideally designed to be used with a PLC to convert a 4~20mA signal into a 10~1010Hz frequency, (Other calibrations available.) allowing direct connection into a digital input on a PLC (Use with interupts.) and powered by the PLC's 24Vdc power supply. Refer to 'Connection Diagrams' for the multiple connection variations.

    Note: The converson from TWN-FO to TWI-FO is easily achieved by the removal of two internal links. Refer to ranging information.

     Ordering Information:
     twnfo-ordering

     Specifications:twnfo-specs

     

     

     

     

    TWN-FF (TWI-FF) (PLC Input Transmitter) 
     twnff-seriespic
     

    Features:

    • Trimec DP490 to PLC Interface.
    • Frequency I/P Divided to a Frequency Output.
    • LED Indication of Frequency Output.
    • Isolated Input to Output 1.6kV for TWI-FF.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Reverse Polarity Protection.
    • Externally Accessible Span and Zero Adjustments.
     

    Description:

    The TWN-FF & TWI-FF are designed as an interface between a Trimec DP490 Flow Transducer and a PLC. The TWN-FF & TWI-FF divide the frequency of the pulses from a DP490 to an output frequency a PLC can Register without missing counts. For example if a DP490 is measuring flow that results in an output frequency of 40Hz, and the maximum PLC input frequency is 10Hz, the TWN-FF & TWI-FF would be ordered with a division factor of four.

    The TWN-FF & TWI-FF can be powered by the PLCs 24Vdc power supply. The output is a 50:50 mark space ratio, and can be directly connected into most PLC digital inputs.

     Ordering Information:
     twnff-ordering

     Specifications:

     

    Input -Maximum Range 100kHz. (5V p-p input).
      -Trigger Level 2.5Vdc.
      -Amplitude 5~30Vdc Squarewave.
      -Maximum Range 5kHz.
    Output -Function Squarewave Output; 50:50 Mark \ Space Ratio.
    -Sink/Source -Amplitude (Power Supply) -2V. (No Load.)
      -Load Limited to Sink \ Source 100mA @ 24Vdc. (50mA @ 12Vdc.)
        Maximum Load = 100mA @ 24Vdc.
        Suitable for most optocoupler inputs.
    -Open Collector   30Vdc, 100mA Max.
        Other variations available on request.
    Isolation Test Voltage (TWI-FF Only) Input to Output 1600Vdc for 1min.
    Power Supply   11~28Vdc.
    Current Usage   15mA (No Output Load.)
    EMC Compliances   Emissions EN55022-A, Immunity EN 50082-1, <1% Effect FSO Typical.
    Operating Temperature   0~70C.
    Storage Temperature   -20~80C
    Operating Humidity   5~85%RH Max. Non-condensing.
    Construction   Polyamide Thermoplastic Rail Mount.
    Dimensions   L=79mm, W=22.5mm, H=85mm.

     

     

     PI-M (Programmable Isolating
    Maths Function Transmitter)
     pi-seriespic1
     

    Features:

    • Field Programmable Input and Output Ranges.
    • 32 Predefined Math Functions.
    • 12 Bit Resolution. (0.025%)
    • Isolated Input to Output 1.6kV.
    • High Accuracy to 0.1%
    • Universal AC/DC Power Supply.
    • Compact DIN Rail Mount Enclosure.
    • 120 Point User Definable Curve Fitting
     Ordering Information:
     pim-ordering

     

     

     LPI-P (Potentiometer Transmitter)
     lpi-seriespic2
     

    Features:

    • Field Programmable Input Ranges.
    • Isolated Input to Output 2.0kV.
    • High Accuracy.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Selectable 3 Second Input Damping.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpip-ordering

     

     

     LPN-P (Potentiometer Transmitter)
     lpn-seriespic
     

    Features:

    • Field Programmable Input Ranges.
    • High Accuracy.
    • 40~200mv Output Test Signal.
    • LED Indication of Loop Current.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     

    Ordering Information:

    LPN-P Standard 0~100% Input.
    Programmable Input Range Calibration.

     

     

    LPI-K (Resistance Transmitter) 
     lpi-seriespic3
     

    Features:

    • Field Programmable Input Ranges.
    • High Accuracy.
    • Linear with Temperature.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpik-ordering

     

     

     LPI-R (RTD Transmitter)
     lpi-seriespic4
     

    Features:

    • Pt100 RTD Standard Input.
    • Isolated Input to Output 2.0kV.
    • Field Programmable Input Ranges. (LPI-R-P)
    • High Accuracy.
    • Linear With Temperature.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Low Cost.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpir-ordering

     

     

    LPI-N (Differential RTD Transmitter) 
     lpi-seriespic5
     

    Features:

    • Differential Pt100 RTD Standard Output
    • Isolated Input to Output 2.0kV.
    • Field Programmable Input Ranges.
    • High Accuracy.
    • Linear with Temperature.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpin-ordering

     

     

    LPN-R (RTD Transmitter) 
     lpnr-seriespic
     

    Features:

    • Field Programmable.
    • Pt100 RTD Standard Input.
    • High Accuracy 0.1%.
    • Linear With Temperature.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current (CL).
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
    • Available With One or Two Transmitters per Enclosure.
     Ordering Information:
     lpnr-ordering

     

     

    LPN-R-H (In Head RTD Transmitter) 
     lpnrh-seriespic
     

    Features:

    • Field Programmable.
    • Pt100 RTD Standard Input.
    • High Accuracy 0.1%.
    • Linear With Temperature.
    • LED Indication of Loop Current (CL).
    • Low Cost.
    • Easy to Install.
    • Compact Industrial Head Mount Enclosure.
    • Dual mounting holes for 33mm or 40mm.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
    • Also Available in Conduit Box, or with DIN Rail Mount Foot.
     Ordering Information:
     lpnrh-ordering
     LPN-R-H Specifications:
     lpnrh-spec

     

     

     LPI-T (Thermocouple Transmitter)
     lpi-seriespic
     

    Features:

    • Available for Types J, K, N, R, S, T.
    • Field Programmable Input Ranges.
    • Output Linear With Temperature.
    • Internal Cold Junction Compensation.
    • Isolated Input to Output 2.0kV
    • High Accuracy.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpit-ordering

     

     

     LPI-B (2 Wire Bridge Transmitter)
     lpi-seriespic
     

    Features:

    • Field Programmable Bi-Polar Input Ranges.
    • Isolated Input to Output 2.0kVDC.
    • High Accuracy.
    • 40~200mV Output Test Signal.
    • LED Indication of Loop Current.
    • Selectable 3 Second Input Damping.
    • Low Cost.
    • Easy to Install.
    • Compact DIN Rail Mount Enclosure.
    • Available Standard or Special Calibration.
    • Reverse Polarity Protection.
     Ordering Information:
     lpip-ordering

     

     

     PI-S (Programmable Isolating
    Dual Set Point Alarm Unit)
     pi-seriespic
     

    Features:

    • Field Programmable Input Ranges.
    • Isolated Input to Output 1.6kV.
    • High Accuracy.
    • Universal AC/DC Power Supply.
    • 0~100% Alarm Set Point Range.
    • Dual Relay or SSR Drive Outputs.
    • LED Indication of Relay Status.
    • N.O. \ N.C. Selectable Contacts.
    • 0.2~30sec Adjustable Delay.
    • High, Low, Window & Differential Selectable Alarms.
     Ordering Information:
     pis-ordering
     
    Next >
    [ Back ]