|
|
IN-DB01
|
|
The DB01 Calibrator comprises of a heated and force air cooled metal block into which a standard insert fits. The insert is pre-drilled to accommodate the probe or probes under test. The temperature is set and displayed via the pre-programmed, incorporated controller which provides such options as: a) Ramping, if selected. b) Multiple set points pre-programmed. The inserts are drilled to standard probe sizes or can be drilled to specific profiles on request. One insert is supplied with each calibrator.
|
|
 |
|
Features::
Temperature range; From ambient to +200ºC.
Accuracy; ±0.25ºC.
Setting / display; ±0.1ºC.
Sensor; Pt100 to DIN EN60751: 1996.
Control; PID processor controlled.
Block insert:-Diameter, 24mm OD to 6.4 ID, -Depth, 255 mm.
Power Supply; 230V AC 2A 50Hz (others by request).
Power Consumption; 500VA.
Dimensions; 325 x 140 x 335mm.
Weight; 5.5kg.
Temperature range; From ambient to +200ºC.
Accuracy; ±0.25ºC.
Setting / display; ±0.1ºC.
Sensor; Pt100 to DIN EN60751: 1996.
Control; PID processor controlled.
Block insert:-Diameter, 24mm OD to 6.4 ID, -Depth, 255 mm.
Power Supply; 230V AC 2A 50Hz (others by request).
Power Consumption; 500VA.
Dimensions; 325 x 140 x 335mm.
Weight; 5.5kg.
Temperature range; From ambient to +200ºC.
Accuracy; ±0.25ºC.
Setting / display; ±0.1ºC.
Sensor; Pt100 to DIN EN60751: 1996.
Control; PID processor controlled.
Block insert:-Diameter, 24mm OD to 6.4 ID, -Depth, 255 mm.
Power Supply; 230V AC 2A 50Hz (others by request).
Power Consumption; 500VA.
Dimensions; 325 x 140 x 335mm.
Weight; 5.5kg. |
|
|
IN-GEN
|
|
The IN-GEN is a battery powered, hand held, multifunction generator used in conjunction with a multimeter to simulate RTD's, thermocouples, mA, mV and V signals.
|
|
 |
|
Features::
Simulates:
RTD's
mA
T/C's
mV
V
Compact.
Battery Powered.
Low Cost.
Simulates:
RTD's
mA
T/C's
mV
V
Compact.
Battery Powered.
Low Cost.
Simulates:
RTD's
mA
T/C's
mV
V
Compact.
Battery Powered.
Low Cost. |
|
Industrial Solutions 
