Features:

• 16 Channel Multiplexer
• Field Programmable Inputs
• Field Programmable Output
• Input Types Available:
  • - MilliAmp;
  • - Pt100 RTD;
  • - Volts and Millivolts;
• Clock/Reset Channel Selection, or Binary Channel Selection.
• High Accuracy 0.1%
• Compact DIN Rail Mount Enclosure
• Easy to Install
• Low Cost Expansion for PLCs
• Solid State Switches for Reliability

Description:

The 2100-M is used extensively in industrial plants, with proven reliability and accuracy. It comes complete and ready to operate in a compact DIN rail mount enclosure.

The 2100-M (previously the EXPO-3) can multiplex up to 16 analogue inputs, into one input of a PLC or a Data Logging System. It uses solid state switches, making it extremely reliable and durable.

The 2100-M is widely used to expand up inputs on the 2100-A 16 and 2100-A4, plus give economic easy accurate analogue input expansion on a PLC.

The PLC only requires two digital outputs and one analogue input to select and receive data from the 2100-M. For each additional 2100-M added to the system, only one more analogue input is required.
(The typical fan-out for most PLC's is up to eight 2100-M's)

The 2100-M-I, the 2100-M-R and the 2100-M-V are on board input span programmable. The output can be configured to a selection of industry standard output signals.

- MODBUS TCP

- MODBUS RTU

- MicroScan

Features:

• 16 Universal Analogue Inputs
• Each Input Individually Selected & Scaled
• 16 Bit Resolution
• Differential Input for T/C, mV, V & mA
  • T/C: B, E, K, J, N, R, S, T
  • RTD: 0~225°C to -200~850°C
  • mV: 0~25mV to ±500mV
  • V: 0~1V to ±15V
  • mA: 0~1mA to ±100mA
• 2 Analogue Outputs
• 4 Digital, Isolated, Optocoupler Inputs
• 2 Digital, Isolated, Relay Outputs
• RS422/RS485 Up to 1200m
• RS232 Cost Effective Radio Installation
• RS232 Cost Effective PC or PLC AI Expansion
• Clock/Reset Drive up to 4 2100-Ms
• Selectable Baud Rate
• Average comms message, RS232, RS422, RS485, Ethernet = 100msec
• 4 messages required to read all inputs
• Internal memory refresh rate for all channels = 4 secs
• Digital Inputs
  • State or Count
  • Speeds to 50Hz
• Interface for 2100-R (16 Relays) or 2100-ME (Memory)
• Easy Programming Via MicroScan Maps
• Programmable Station Number
• Programmable Relay States - NO or NC
• Comms Failure Time-out Using Relay 2
• Comms TXE and TX Delay Programming
• Programming Information Retained on Power Down
• Universal AC/DC Power Supply
• Easy to Install
• Compact DIN Rail Mount Enclosure
  

Description:

This station has all the friendly  features of a monitoring station. The 16 Universal Analogue Inputs are software programmable using the user friendly MicroScan software. Each input can be configured for any of the following inputs: Thermocouple, RTD Pt100, Pt1000, mA, MV & V. The wide choice of spans ensures high accuracy. The analogue inputs on the 2100-A16 can be expanded up to 76 using the 2100-M Input Multiplexers.

 Ordering Information:

 Terminals and Layout:

Features:

• Cost Effective PLC Analogue Output Expansion.
• 8 AO Require Only 7 PLC Digital Outputs.
• Each Additional 2100-AO Used Requires
  Only 1 Extra PLC Digital Output.
• 4, 8, or 12 bit AO Resolution Selectable.
• BCD or Clock/Reset AO Channel Selectable.
• 8 Analogue Outputs: mA or V.
• 8 Analogue Inputs: mA or V.
• 8 PID on Board Controllers - Future Development.
• 12 Bit Resolution.
• 12 Digitally Isolated, Optocoupler Inputs.
• 4 Digital Inputs:
  • State or Count.
  • Speeds up to 50Hz.
• 2 Digital, Mains Isolated, Relay Outputs.
• 1 AI can be Demultiplexed to 8 AO.
• 8 AI can be Multiplexed to 1 AO.
• RS422/RS485 Up to 1200m.
• RS232 Cost Effective Radio Installation.
• RS232 Cost Effective PC or PLC AI or AO Expansion.
• Selectable Baud Rates.
• Easy Programming Via Microscan Maps.
• Programmable Station Number.
• Programmable Relay States - NO or NC.
• Comms Failure Time-out Using Relay 2.
• Comms TXE and TX Delay Programming.
• Programming Information Retained on Power Down.
• Universal AC/DC Power Supply.
• Easy to Install.
• Compact DIN Rail Mount Enclosure.

Description:

This station provides economical  analogue output expansion for PLC's plus is also designed for use as a Remote Station.

The 8 analogue outputs are individually configurable as 4~20mA, 0~20mA, 0~10Vdc, 2~10Vdc.

PLC Application:

The 2100-AO is driven by the PLC to determine the output channel and the output level. Here are 2 options for connecting between the PLC and 2100-AO.

Option 1: Using one analogue output from the PLC plus 4 on/off outputs.

Option 2: Using 7 on/off outputs from the PLC (no analogue output required).

For further details, please refer to the Installation Guide.

 Ordering Information:

 Specifications:

 Connections for the 2100-AO

Features:

• Audible & Relay Alarms for Communication Failure
• Easy to Install
• LED Status Indications
• Compact Desk Top Box
• Low Cost
• Selectable Alarm Time Delays
• Isolation Between Field Units & Computer
• Complete with Serial Cable & AC/DC Adaptor

Description:

The 2100-IS is a compact, desktop module that isolates and converts RS232 from a computer to RS422 or RS485 for communication to a field data logging system. Its drive and receiver meet EIA standards RS-422-A, and CCITT recommendations V.11 and X.27, and are designed for multipoint transmission on long bus lines in noisy environments.

It includes thermal shutdown and over current limiting. The 2100-IS includes audible and fail safe alarms for communications failure, with selectable time delays. It is capable of interfacing with telephone  modems, and RF modems.

It has independent power on both sides of the isolation barrier, making it suitable for working with many types of PCs and PLCs.

Ordering Information:

 Specifications:

Features:

• Easy to Install.
• LED Status Indications.
• Compact Interface Module.
• Low Cost.
• RS422 or RS485 Selectable.
• Complete with a 9/25D Serial Cable & AC/DC Adaptor.

Description:

The 2100-NS is a compact interface Module that converts RS232 from a computer to RS422/485, for communication to a field data logging system. Its driver and receiver meet EIA standards RS-422-A and CCITT recommendations V.11 and X.27, and are designed for multipoint transmission on long bus lines in noisy environments. It includes thermal shutdown and over current limiting.

It is powered by an external AC/DC adapter, making it suitable for working with many types of PCs and PLCs. It comes complete with the AC/DC adapter, and a 200mm 25way to 9way adapter cable for the PC.