| 2100-M (Analogue Input Multiplexer) |
|
IN-ICM - Isolating Clock Module for 2100-M
|
Please Note: Modbus Protocols are NOT available with the 2100-M
If you require a multiplexer with Modbus Protocols please view the 2100-A16. |
|
Features:
- 16 Channel Multiplexer
- Field Programmable Inputs
- Field Programmable Output
- Input Types Available:
- - MilliAmp;
- - Pt100 RTD;
- - Volts and Millivolts;
- Clock/Reset Channel Selection, or Binary Channel Selection.
- High Accuracy 0.1%
- Compact DIN Rail Mount Enclosure
- Easy to Install
- Low Cost Expansion for PLCs
- Solid State Switches for Reliability
|
|
Description:
The 2100-M is used extensively in industrial plants, with proven reliability and accuracy. It comes complete and ready to operate in a compact DIN rail mount enclosure.
The 2100-M (previously the EXPO-3) can multiplex up to 16 analogue inputs, into one input of a PLC or a Data Logging System. It uses solid state switches, making it extremely reliable and durable.
The 2100-M is widely used to expand up inputs on the 2100-A 16 and 2100-A4, plus give economic easy accurate analogue input expansion on a PLC.
The PLC only requires two digital outputs and one analogue input to select and receive data from the 2100-M. For each additional 2100-M added to the system, only one more analogue input is required.
(The typical fan-out for most PLC's is up to eight 2100-M's)
The 2100-M-I, the 2100-M-R and the 2100-M-V are on board input span programmable. The output can be configured to a selection of industry standard output signals.
|
|
Ordering Information:
|
| Note: Power supply H is field selectable for M; and M for H. Power supply L must be ordered separately. |
| Specifications: |
| Analogue Input Multiplexer: |
16 Single ended inputs |
Each Multiplexer is span programmable with in the specified input type as below:
2100-M-R=RTD Pt100 (-200~600°C) (-330~1100°F)
2100-M-I=4~20 / 0~20mA
2100-M-V=mV & V (-25~500mV and 0~10V DC)
2100-M-T=Thermocouple (-100~1700°C) (-150~3000°F)
Note 1:Minimum Thermocouple span = 200°C (400°F)
Note 2:2100-M-T requires a PI-T transmitter |
| Accuracy: |
<± 0.1% FSO Typical |
| Ambient Drift: |
< 00.1% / °C FSO Typical |
Isolation on clock
& reset: |
1kV AC/DC for 1 min |
| Operating Temperature: |
0~60°C |
| Storage Temperature: |
-20~80°C |
| Operating Humidity: |
5~85% RH Max. Non condensing |
| Housing: |
DIN & EN Rail mount
L = 195mm, W = 120mm, H=70mm |
| Power Supply: |
-H
-M
-L |
85~264V ac/dc; 50/60 Hz; 10VA
23~90V dc; 10VA
10~28Vac/dc; 50/60Hz; 10VA
Note: Power supply H is field selectable for M; and M for H. Power supply L must be ordered separately.
|
|
 |
|
Industrial Solutions 
